The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
Construction utilizes void-free
molded plastic technique
Low reverse leakage
High forward surge current capability
High temperature soldering guaranteed:
260 C/10 seconds,0.375”(9.5mm) lead length,
5 lbs. (2.3kg) tension
Case: JEDEC DO-201AD molded plastic body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight:0.04 ounce, 1.10 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
| | SYMBOLS | 1N 5400 | 1N 5401 | 1N 5402 | 1N 5403 | 1N 5404 | 1N 5405 | 1N 5406 | 1N 5407 | 1N 5408 | UNITS |
| Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 300 | 400 | 500 | 600 | 800 | 1000 | VOLTS |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 210 | 280 | 350 | 420 | 560 | 700 | VOLTS |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 300 | 400 | 500 | 600 | 800 | 1000 | VOLTS |
| Maximum average forward rectified current 0.375”(9.5mm) lead length at TA=75℃ | I(AV) | 3.0 | Amps |
| Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) | IFSM | 150 | Amps |
| Maximum instantaneous forward voltage at 3.0A | VF | 1.0 | VOLTS |
| Maximum DC reverse current TA=25 at rated DC blocking voltage TA=100℃ | IR | 5.0 100 | µA |
| Typical junction capacitance (NOTE 1) | CJ | 30.0 | pF |
| Typical thermal resistance (NOTE 2) | RθJA | 20.0 | ℃/W |
| Operating junction and storage temperature range | TJ,TSTG | -65 to +175 | ℃ |
Note:
1.Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to ambient at 0.375”(9.5mm)lead length,P.C.B. mounted
RATINGS AND CHARACTERISTIC CURVES
